imc Data Acquisition
Whether it’s in a vehicle, on a test stand or monitoring equipment and machinery - imc data acquisition (DAQ) systems are easy to operate and will help you become more productive and profitable.
imc ARGUSfit
The imc ARGUSfit covers the entire frequency range of physical measurement applications with a aggregate sampling
rate of up to 5 MS/s and channel rates of up to 500 kSample/s, depending on the module type.
The imc CRONOSflex covers the entire frequency range of physical test and measurement requirements by providing up to 2 MSamples/s with channel rates up to 100 kSamples/s. Measurement modules are available for every common type of signal and sensor.
Simply load your data and immediately see a visual overview of your test result - find data anomalies, identify correlations, compare test runs, locate events, or clean up data. No coding required.
DTS Data Acquisition
DTS provides comprehensive Test & Measurement Solutions specifically engineered to withstand and perform flawlessly in extreme conditions.
Compact, 6 degrees of freedom (6DOF) shock and vibration data logger with onboard recording or real-time streaming for harsh test environments.
- Size: 43 x 43 x 15, 50 g
- Sensors: 10 built-in; triaxial low-g and high-g accelerometers, triaxial angular rate, temperature
- Sampling rate: programmable 100 to 20,000 sps (record or streaming)
- Shock rating: 500 g
Compact Ethernet-based data acquisition unit with universal analog sensor support, onboard recording, and real-time streaming for airborne and onboard testing.
- Size: 42 x 42 x 13 mm, 50 grams
- Channels: 6-channel module; standalone, networked, or FTI-integrated deployments
- Record: 400k sps/channel, 16 GB non-volatile flash memory
- Stream: 20k sps/channel; IRIG 106 Chapter 10, IENA or TmNS
- Shock rating: 500 g
JAVAD GNSS
Proven GNSS navigation for demanding applications featuring proprietary TRIUMPH ASIC technology, patented spoofing and jamming detection and low SWaP-C.
The new powerful and reliable receiver for high-precision navigation systems is based on our 874 channel chip, equipped with the internal 4G/LTE/3G card, secure, accessible microSD and microSIM cards, and supports “Lift & Tilt” technology. The TRIUMPH-3 receiver can operate as a receiver for post-processing, as a Continuously Operating Reference Station (CORS) or portable base station for Real-time Kinematic (RTK) applications,
GrAnt is a versatile high-performance antenna. It can be mounted on flat surfaces with four screws or mounted on standard poles (5/8-11 or 1-14 inches thread).
GrAnt, like all JAVAD GNSS antennas, can track GPS, GLONASS, GALILEO, BeiDou, WAAS, EGNOS, MSAS, GAGAN, QZSS signals.
The TRE-DUO-IMU is an all-constellation OEM GNSS receiver with dual antenna GNSS Heading and an integrated MEMS IMU for roll and pitch. This GNSS + IMU combination provides RTK performance with a 3D attitude for multiple applications. A 64-pin connector allows easy access to all ports and data for integrators to quickly provide time, position, and attitude.
Rotational Telemetry
