About Us

 The 1-channel telemetry system T1 is ideal for wireless transmission of  strain gauge signals  from rotating shafts. The transmitter electronics  allow the direct connection of strain gauges in full- and half-bridge  mode. The bridge supply is fixed 4 Volt DC and the gain can be freely  selected in 4 levels. The transmitter electronics (encoder) is only 35  mm wide, 18 mm long and 12 mm deep and weighs only 13 grams.

 The TEL-FLEX offers users a  telemetry series for particularly cramped quarters. The extremely flat  and flexible transmitter electronics allow torque measurements under the  tightest installation conditions. The total thickness is less than 2  mm. Thanks to the space-saving design based on a pliable film substrate,  the flexible telemetry makes it extremely easy to apply to rotating  shafts or other machine components.

The  TEL1 telemetry transmits its data digitally and inductively with a  resolution of 12 bits to the TEL-1 receiver head. A cable connects it to  the TEL1 receiver. For signal output, an analog output (+/- 10 V) is  available as standard. Optionally, a current loop (4 ... 20 mA) can also  be integrated.

 MTP-NT telemetry is a small and flexible telemetry system that has a  modular design. It consists of freely selectable sensor modules, a  controller module and an inductive transmitter unit. Depending on the  needs of the user, the telemetry system can be freely assembled and  subsequently adapted. 

 The right module for every sensor type.

MTP-NT  telemetry offers two module types for sensors: a universal analog  module for voltage, strain gauge (quarter-, half- and full-bridge) and  IEPE sensors and a temperature module for measuring thermocouples (Type K  and Type J) and PT100/1000. Each sensor module is available in a  2-channel or 4-channel version and is equipped with signal conditioning,  antialiasing filters, A/D converters and a digital output.

 The modular telemetry system CTP enables the acquisition, processing and  transmission of 4, 8 or 16 parallel measurement signals from stationary  or moving machines and vehicles, such as in Pass-By-Noise testing.
The  processed signals digitized with 16-bit resolution are transmitted  wirelessly to the receiver unit via a robust and interference-free radio  link. Depending on the bit rate, transmission power and antenna types,  distances of up to 2000 m in free field are possible. The PCM format of  the measurement data ensures optimum interference immunity. The power  supply is external with 10 to 30 VDC. 

 The CTP-Rotate telemetry system enables the acquisition, processing and  transmission of 4, 8, 16, 32 or 64 parallel measurement signals from  rotating machinery, test benches, wheels and rotors. The integrated  accumulator unit allows easy and quick installation of telemetry. The  weatherproof system designed for outdoor use (IP65) enables data  transmission over distances of up to 20 meters in free fields. 

 DX telemetry is a particularly compact and lightweight  multi-channel telemetry. Thanks to the universal transmitter module, it  can be used flexibly and enables wireless measurements with different  numbers of channels and sensor assignments. The possibility of operating  up to four transmitters synchronously with one receiver allows for  simultaneous acquisition of spatially distributed measurement points. 

Quasonix’ digital multi-mode dual telemetry transmitters provide the flexibility of two high performance, independent transmitters in one package. The standard 2.0 inch by 3.0 inch design includes a single MDM-15 interface as a primary connector for power, clock and data, and serial  communications, while providing two separate RF outputs via SMA connectors. This configuration is ideal for two antenna applications that utilize Space-Time Coding (STC) or Frequency Diversity. The  transmitters are designed to transmit airborne telemetry data from a test article to ground stations.

A legacy side by side design is employed in applications requiring bands that currently are not available in the Quasonix TIMTER™ Multi-mode Dual Telemetry Transmitter. A new side by side option will be available soon! 

  At an astonishing 1.3 cubic inches, the nanoTX™ transmitter supports the smallest of airborne platforms with programmable multi-mode operation and as much as 10 Watts of RF output. The smallest ARTM transmitter now available, nanoTXTM is ideal for airborne applications with strict SWAP constraints. 

Dare to compare the new 3rd Generation RDMS™ with the proven 2nd Generation model. The highest performing telemetry receiver on the market is available in an elegant, compact 1U rack mount package and a new 3U touchscreen package with dual, 7-inch full color touchscreens. Configurations include one or two channels, a built-in integrated, three-channel spectrum analyzer, automatic AGC zeroing, PCM deframing (header detection/extraction, Sub-Frame ID (SFID) checking/extraction), built-in playback demodulator, combiner IF output, simultaneous TTL and RS-422 outputs, contiguous frequency tuning, adaptive equalizer, and decoding for SOQPSK Space Time Coded and Low Density Parity Check encoded signals.

Complete Receiver – RF to Bits - A single-box solution that includes downconversion, demodulation, and bit synchronization.

Spectrum analyser shows frequency domain view for up to three channels simultaneously.

Space-Time Coding (STC) operates with Quasonix STC-enabled transmitters to eliminate the dropouts caused by transmit antenna pattern nulls due to inter-antenna interference.

Automatic AGC zeroing.

Browser-based remote interface. 

 Quasonix’ Multi-Mode Compact RDMS™ Telemetry Receiver features an extremely-sensitive RF downconverter integrated with the company's market-leading ARTM demodulator and bit synchronization in a compact 12 cubic inch flight-ready package. When compared to the competition, RDMS  offers a remarkable 6 to 8 dB sensitivity advantage. What you choose to do with the extra link margin is up to you. 

 Quasonix' digital multi-mode telemetry transmitters are the benchmark of  the industry, providing unparalleled performance and value, in small,  robust, power-efficient packages. The TIMTER™ transmitter, now in its  third generation and smaller than ever at 4.1 cubic inches, offers the  most versatility with advanced capabilities like L/S/C frequency tuning,  and output power up to 25 Watts.